Sneaker School - Recap

Over 60 hrs of work created a pair of bespoke Air Jordan 1's.  The process of making a pair of sneakers is straightforward: cut leather, sew leather, stretch leather, glue on sole. 

Even with a straightforward process, the shoe maker has the ability to put creativity and innovation into each pair he creates.

Its All A Process

Its All A Process

There were early mornings and late nights, but it was all worth it.  Stitching the leather was the toughest part for me.  A crooked stitch meant the thread had to be removed and that piece of leather might need to be replaced.  There was no room for error.

Dom "The Shoe Surgeon"

Dom "The Shoe Surgeon"

The Box

The Box

I'm extremely proud of what I created.  From the flyknit and leathers down to the lasting and stitching, I made it.  I have a Nike sole and a swoosh, but it was made by Aaron. 

One of One.

The 11 students came from different backgrounds, but all shared a love for sneakers and making.  Throughout the whole class, we learned and worked together.  Everyone helped each other realize thier creations.  I was grateful and inspired by the way we worked together as a team.

Dinner with the class

Dinner with the class

Sneaker School - Day 5

The 5th and last day is also the LAST day.  I started out with a fully stitched upper, sock and toe liner included.  The other students were at various stages of the construction process.  As one person finished learning, they were teaching someone else how to do it.  It was great,

The upper materials now need to stretch (lasted) over the silhouette of the Air Jordan 1.  The shoe last is made in the shape of the shoe, and is made from a plastic so nails can be used to pull the leather tight .  Before the leather is lasted, we nailed a board to the bottom of the last.  This is the strobel, the bottom of the shoe and the part that holds everything together.

With the strobel tacked onto the last, I started pulling and nailing the leather to the last.  First you pull down the heel, the the toe then alternate from side to side until the leather takes the shape of the last.

After lasting, the leather is bonded to the strobel, then the nails are removed.

The excess material on the bottom of the shoe is skived off to fit into the outsole. 

After seating the upper into the outsole cup, you mark the permeter of the shoe with a pen, this is the cement bond line to hold the shoe together.

The outsole and upper are bonded together, then the upper and sole are stitched together.

Tomorrow, I'll share pictures of the sneakers and what I learned from the course.

Sneaker School - Day 3

After day 2, The Shoe Surgeon took our leathers to be skived.  Skiving is the removal of leather to reduce the thickness.  The overlapping pieces of leather were skived to fit together properly during bonding and stitching.

IMG_5898.JPG

In Learning About: Flat Knitting, I researched traditional sewing and found this video that explain the sewing process nicely.

Sewing is all about repetition.  I worked one stitch at a time on scrap pieces, until I felt comfortable to work on my pieces.  A sewing machine engages everything: arms, legs, eyes and ears.  The foot pedal, holding lining up the materials, listening to the hum of the machine.

After a few sloppy stitches, I started comparing my work to the one created by Nike on a high volume production line.  Perfect lines sewed by a person with years of experience?

Mass Production Sewing

Mass Production Sewing

Should I start that row over?  Should the stitches look exactly like the original? No.  Our learning comes from making "mistakes".

Each stitch told the story of learning by doing.  I am gaining confidence and building my custom creation, one stitch at a time.

UP NEXT - DAY 4 - More stitching/sewing and Lasting

Sneaker School - Day 1

The Decon/Recon course started today in Downtown LA.

Prior to the start of class, we selected a base shoe for customization. 

I chose to build my custom sneaker from the Air Jordan 1, designed by Peter Moore.  Besides the color of the outsole, the base colorway of the shoe doesn't matter, we will be replacing all the upper materials with a selection of leathers from Ecco Leather.

Air Jordan 1

Air Jordan 1

The first step in the deconstruction is removing the stitching and the outsole from the upper.

The bone folder, one of the tools we received with the class, is vital for separating the leather from the outsole without damaging either surface.

Removing the sole using a bone folder

Removing the sole using a bone folder

After the outsole is removed, I deconstructed the upper starting with the swoosh.

A thread puller and exacto knife were used to remove each component with surgical precision.

IMG_5831.JPG

There are over 1000 individual stitches in each shoe.  During the deconstruction process, I could see deeper into the footwear manufacturing process.  I started to understand how and why pieces are shaped in a certain way.  Why double and triple stitches exist at critical points in the shoe.  You can see the amount of labor that goes into making each pair of shoes.

Swooshless

Swooshless

The end result was 15 pieces needed for pattern tracing.

The final product of deconstruction

The final product of deconstruction

The final task for day 1 was pattern tracing.

Along with tracing the outside profile of each piece, we had to trace the stitch lines for all pieces that overlap other pieces.

UP NEXT - DAY 2 - material selection and pattern cutting

Sources

http://www.complex.com/sneakers/2015/05/why-the-chicago-jordan-1-matters

Decon & Recon - The Shoe Surgeon

““The capacity to learn is a gift; The ability to learn is a skill; The willingness to learn is a choice.” ”
— Brian Herbert

Next week, I'll be in taking the Decon/Recon course offered by The Shoe Surgeon.  Over 5 days, with a handful of other students, we will take an existing shoe, deconstruct it, cut/sew new patterns and end up with a one of one shoe. 

Custom AJ 1 - The Shoe Surgeon

Custom AJ 1 - The Shoe Surgeon

I'm excited to work with The Shoe Surgeon (Dominic Chambrone).  His story is inspiring and we share a similar vision for improving and creating newness.

“I want to evolve and do stuff that no one else has done yet in the industry and be ahead of the game”
— Dominic “The Shoe Surgeon” Chambrone

The course will also bring together students who share a passion for shoes and learning.  Until now, there were few places where people can gain footwear experience outside of a shoe repair store or working for a large footwear company.  Learning by doing is the best way to gain footwear experience.

Besides gaining experience, the course give you the skills necessary to start your own footwear business.

I'm looking forward to creating a story through my pair.  Selecting the colors and materials, cutting and sewing using my hands.  The end product is a true reflection of my creativity, hard work and attention to detail.